Accurate measurements help you order the right amount of flooring and avoid delays. These FAQs explain how to measure rooms, plan waste allowance and prepare information for a quote.
Measure each room at its longest length and widest width, even if the walls are not perfectly straight. Multiply length by width to calculate the square metres for a simple rectangular room.
For example, a room measuring 4 metres by 3 metres has an area of 12 square metres. You will usually need to add a waste allowance on top of this figure depending on the flooring type, layout and fitting pattern.
If your room has alcoves, bay windows, chimney breasts or open-plan sections, split the space into smaller rectangles. Measure each section separately, calculate the area for each one, then add them together.
Draw a simple sketch and write the measurements directly on it. This makes it easier to check your figures and helps us understand the room if you request a quote.
Waste allowance covers cuts, trimming, mistakes and pattern matching. A straight plank installation may need less waste than a herringbone, diagonal or patterned layout. Stairs, hallways and irregular rooms can also increase waste.
If you are unsure how much to allow, ask your fitter or request guidance before ordering. Ordering too little can cause delays, especially if the same batch is no longer available later.
Multiply the room length by the room width in metres. For example, 5m x 4m = 20m² before waste allowance.
Many projects need a waste allowance of around 5–10%, but herringbone, patterned floors or awkward spaces may need more. Check with your fitter if unsure.
Yes, include any areas where flooring will be fitted. If a cupboard or alcove is excluded, make a clear note on your measurement sketch.
It depends on the installation plan. Many floors are fitted up to fixed kitchen units rather than underneath them, but check with your fitter.
Yes. Use the free quote form and provide room measurements, product choice and any relevant notes or drawings.
Measure the longest and widest points, then break the room into smaller rectangles for a more accurate total.
Yes. Stairs are calculated differently from flat rooms and should be measured separately if you want them fitted.
